Vinyl balloon decal Instructions

Important! Read all steps below before you begin.
1. Make up your tassels and attach to the ribbon/string.
-
2. Fill your balloon with helium so it will float up and tie on the string/ribbon and secure to a weight to hold it down.
-
3. Carefully remove the text decals white backing paper from the clear transfer tape at a 45º angle. You will need to make sure the clear transfer tape is sticking nicely to the letters. Rub down and lift. You can also use a pin to help lift up the letters from the white backing. You should end up with all your letters stuck to the clear transfer tape ready to place over your balloon. See diagram below.
-
4. Position and stick your transfer tape with letters on the inflated balloon and rub down each letter to stick. Get someone to help you hold the balloon in place while you stick on the decal. 5. Carefully remove the clear transfer tape from the decal at a 45º angle so you should end up with only the letters stuck to the balloon. Go really slowly so you get all the letters to stick nicely to the balloon. If can be a little tricky but worth it in the end.
-